In the industrial sector, disassembled hinges are generally larger in size and simpler in construction. As it happens, I have almost 10 years of experience working in this niche of industrial hinges. I am familiar with all the common industrial hinges on the market. More often than not, they are custom-made hinges for customers. Today I will discuss with you a question, that is, can environmental chambers be fitted with detachable gate hinges? I will cover the following 6 aspects. I hope this will help you in your hinge shopping.
What is an environmental chamber?
An environmental chamber can also be called a constant temperature and humidity chamber, or a constant temperature and humidity test chamber. Widely adapted to industry electronic and electrical appliances, military, plastics, hardware, chemical, and other industries, such as electronic parts, automotive parts, notebooks, and other products virtual climate environment testing.
The environmental chamber consists of two parts: temperature regulation and humidification. Through the rotating fan installed at the top of the box, the air is discharged into the box to achieve gas circulation. Balance the temperature and humidity inside the chamber. The data collected by the built-in temperature and humidity sensor of the chamber is transmitted to the temperature and humidity controller for editing and processing. The command to adjust temperature and humidity is given, which is done jointly by the air heating unit, condensing tube, and the heating and evaporation unit in the water tank.
What are detachable gate hinges?
Detachable gate hinges are a type of industrial hinge that allows the door to be removed. They are mainly used on the doors of industrial box equipment. They are mainly used to connect the door to the door frame and for load-bearing purposes. These hinges are generally produced in zinc alloy or stainless steel. These hinges are special in that they are required to be removable and also to serve the purpose of load-bearing.
The most important role of disassembled gate hinges is load-bearing and removability. So for other special requirements, it can be powerless. For example, it is installed on some ordinary heavy doors. The door is heavy, but it is just an ordinary door. It only needs to be removable. There are no special requirements inside the door. Below we will detail whether the environmental test chamber can be installed with disassembled door hinges.
What are the features of the detachable gate hinges?
The feature of detachable gate hinges is that they can be disassembled at any time. Some industrial box equipment has heavy doors, and at the same time, because of the practical situation, the doors are disassembled when needed. The use of disassembled gate hinges is more suitable for this situation. The premise is that the box equipment does not have special requirements such as special sealing and waterproofing.
Detachable gate hinges generally do not have a high load-bearing capacity, and the number of hinges installed on a door is generally only two. Because of the low requirements for load-bearing, the installation of two is sufficient for load-bearing. In addition, it is not convenient to install more than one of these disassembly hinges. It is not easy to align all the hinge holes in the installation process after the number of hinges is increased.
Can environmental chambers be fitted with detachable gate hinges?
We introduced what an environmental test chamber is at the beginning of the article. It is a special type of testing equipment that has strict requirements for the environment inside the chamber. For example, the need to maintain a constant temperature or humidity inside the chamber. This strict requirement naturally requires fairly good sealing conditions. The sealing requirements for the door of the chamber are relatively high.
So if we use disassembled door hinges, there is a possibility that they will not meet such requirements. Moreover, why should we use disassembled gate hinges? The door of the environmental test chamber is not to be disassembled. So it is not necessary at all and cannot be installed on the door of the environmental test chamber using the disassembled gate hinge.
IHINGES manufactures a wide range of hinges for environmental test chambers, such as industrial ovens, integrated test chambers, and other special testing equipment. These hinges have been developed specifically for these special test equipment. And all of them are non-removable.
What is an environmental chamber hinge?
Environmental chamber hinges are a class of hinges developed by IHINGES specifically for test equipment. These hinges are characterized by their large size, weight, and load-bearing properties and are often produced in zinc alloy or stainless steel. They are available in the form of a flat structure and a step structure for flat and convex door installations, respectively.
At present, most of the environmental test chamber hinges produced by IHINGES are made of zinc alloy. And equipped with a hinged cover, when the hinge is installed. The hinge cover is mounted on the left and right hinge blocks, which greatly improves the aesthetics of the hinge. The hinge cover is made of stainless steel, which has good anti-corrosion performance and brushed metal texture.
How to distinguish the right from the left of the detachable gate hinges?
Disassembled gate hinges are generally distinguished between left and right. This is because most of these hinges will have the hinge spindle fixed to one of the hinge blocks as a single unit. If the hinge spindle is fixed to the left hinge block as a whole, then the hinge belongs to the left. But if the hinge core is fixed to the right hinge block as a whole, then the hinge belongs to the right.
If we do not figure out this logic, we may fall into the awkward situation of not distinguishing between left and right. If you are a hardware buyer in your company, then the best way to solve this problem is to go to the workshop and see the actual equipment. Or let the workshop workers tell you whether to buy the left or the right. You can take a photo and send it to the hinge supplier according to the form in the photo, and they can supply it according to the photo you provide. That way you can’t go wrong.
Do you need to order a detachable gate hinge?
The reason for writing this article is precise because we are a professional manufacturer of industrial hinges. We manufacture five main types of hinge products: butt hinges, concealed hinges, heavy-duty hinges, detachable hinges, and cold storage room hinges. These are all hinges for industrial equipment and are different from construction and furniture hinges.
If you need to order a disassembled gate hinge, then you have come to the right place. We can provide you with just the right professional customization solution. If you have any questions, feel free to contact us.
